Standard Density Melamine Sponge
Standard Density Melamine Sponge from FoamTech. Manufactured from open-cell melamine resin foam in our own plant, supplied factory-direct with custom density, size, color, and private-label packaging for wholesale and Amazon FBA programs.
Product Details
Standard Density Melamine Sponge: an open-cell melamine foam eraser for wholesale buyers, janitorial distributors, and Amazon FBA sellers. Density, size, color, and packaging are produced to order with inline QC on every batch.
- Universal Standard Dimensions: Standard 100 × 70 × 30 mm rectangular block size offers an optimal ergonomic hand grip and versatile coverage for daily household wiping tasks
- Eco-Friendly Physical Cleaning: Open-cell 3D micro-porous foam structure physically lifts stubborn dirt, tea stains, grease film, and crayon marks with just water, no harsh chemical detergents required
- Lightweight & Flexible Standard Density: Engineered with consistent 8 kg/m³ ± 2 density foam, balancing cost-effectiveness, high water absorbency, and flexible surface adaptability
- Safe Multi-Surface Versatility: Safe for ceramic tiles, stainless steel sinks, glass mirrors, plastic housings, leather interiors, and painted wall surfaces without scratching substrate finishes
- Full B2B OEM/ODM Customization: Direct factory manufacturing supporting custom dimensions (100 × 70 × 30 mm, 110 × 70 × 30 mm, 100 × 60 × 20 mm), custom density (8-16 kg/m³), color choices (White, Gray), and private-label retail packaging (bulk carton, individual polybag, color box)
Open-Cell Melamine Foam vs Generic PU Cleaning Sponge
| Specification | This FoamTech Sponge | Generic Alternative |
|---|---|---|
| Material | Open-cell melamine resin foam | Polyurethane foam |
| Stain removal | Micro-abrasive pores lift marks with water alone | Relies on detergent and surfactants |
| Density range | 8-16 kg/m3, compressed grades available | Low density, usually under 30 kg/m3 |
| Wear pattern | Eraser-like wear; replace when block shrinks | Sogs and tears after repeated use |
| Best use | Walls, tile, cookware exteriors, hard stains | Light daily dishwashing |
Comparison provided for sourcing reference only. Magic eraser is a registered trademark of its respective owner. FoamTech is an independent OEM/ODM manufacturer and is not affiliated with, sponsored, or endorsed by any trademark holder.
FoamTech Sponge vs Retail Magic Eraser (Sourcing Reference)
| Specification | FoamTech Factory Supply | Typical Retail Magic Eraser |
|---|---|---|
| Raw material | Open-cell melamine resin foam – manufactured from the same open-cell melamine foam material as brand-name magic erasers | Open-cell melamine resin foam |
| Density | 8-16 kg/m3, selectable per SKU | 8-10 kg/m3 typical retail grade |
| Eco & safety | OEKO-TEX Standard 100 and EU REACH documentation; ISO 9001-managed plant; test reports per batch | Varies by retail brand |
| Packaging | Bulk cartons, private label, counter display boxes, FBA-ready multipacks | Fixed retail packs |
Comparison for sourcing reference only. Magic Eraser is a registered trademark of its respective owner; FoamTech is not affiliated with or endorsed by the trademark owner.
Related Sourcing Guides
- Are Magic Erasers Just Melamine Foam? A Raw Material and Density Guide for Sourcing Agents – raw material and density basics that determine scrubbing power
- How to Test Melamine Foam Density (8 vs 16 kg/m3) Before Placing a Bulk Order – how to verify density before committing to a bulk order
Application Scenarios
1. Volume Cleaning at Standard Density
The baseline spec of the melamine line: standard-density foam balances softness against wear rate, making it the cost-efficient pick for high-volume, replace-often programs like janitorial rounds and hotel housekeeping.
2. Restaurant Back-of-House
Bus tubs, table edges, menu covers, and tile splash zones reset between seatings; standard-density blocks are issued in quantity and swapped out without ceremony.
3. Painting & Prep Work
Painters use them to lift pencil grids, fingerprints, and dust film from trim and walls before priming — cheaper to consume than higher-density grades.
4. Wholesale & Private Label
Carton supply for distributors and facility programs, with private-label packaging and barcode labeling on request.
FAQ
Q1: What does standard density mean in practice?
A: It is the uncompressed baseline of the melamine line. Cells stay open and the block stays soft and flexible, which suits broad, flat surfaces and frequent replacement. Compressed grades last longer per block but cost more — buyers running replace-often programs usually land on standard density for the better cost per cleaned room.
Q2: How should crews use it for the longest life?
A: Wet the block fully, squeeze out excess water, and wipe with light pressure — let the pores do the lifting rather than pressing hard. Cut larger blocks into quarters with a serrated knife to stretch a carton further on small jobs.
Q3: Which certifications and compliance documents can you provide?
A: Production runs under FoamTech’s ISO 9001, ISO 14001, and ISO 45001 certified systems. OEKO-TEX Standard 100 test reports, EU REACH compliance documentation, and an MSDS are supplied on request. BSCI covers social compliance audits, and FAMA (Disney Facilities and Merchandise Authorization) supports licensed programs.
Q4: What customization do you support?
A: Custom dimensions cut from standard-density buns, Pantone tinting, printed faces, steel-mold logo embossing, and private-label packaging from polybags to display boxes.
Q5: What is the MOQ for bulk and custom orders?
A: Standard unbranded bulk orders start at 1,000-3,000 pieces depending on size. Custom-cut dimensions and private-label packaging typically start at 10,000-20,000 pieces.
Q6: Do you support Amazon FBA sellers?
A: Yes — multipack bundling, FNSKU/UPC labeling, suffocation-warning bags, and carton optimization to cut inbound storage fees. Drop tests can be arranged before shipment.
Related Product
-
Tricolor Gift Box Set Melamine Sponge
-
Assorted 10-Piece Multipack Melamine Sponge
-
Korean Market Poly Bag Melamine Sponge Packaging
-
Japanese Hook Bag Melamine Sponge Retail Packaging
-
Japanese 21-Piece Melamine Sponge Poly Bag
-
8-Piece Scourer Sponge Retail Pack from the GRIT HERO Line
-
Multipack Sleeve Melamine Sponge Retail Packaging
-
Chinese Big Bag 30-Piece Melamine Sponge Bulk Pack
Contact FoamTech
Reply within 12 hours
Any requests or questions about products or anything else are welcome.
- +86 18530085611
- +86 18530085611
- [email protected]
- 500 meters east from the intersection of Shenzhou Road and Yanhe Road, Xinzheng, Zhengzhou, Henan Province, China.
- Fengte Industrial Park, Logistics Park Road, Yangguang Avenue, Yiwu City, Zhejiang Province, China.