Hot-pressed sponge
Hot-pressed sponge from FoamTech. Manufactured from open-cell melamine resin foam in our own plant, supplied factory-direct with custom density, size, color, and private-label packaging for wholesale and Amazon FBA programs.
Product Details
The Hot-pressed sponge is produced in our own plant from open-cell melamine resin foam. It lifts stains with water alone and ships factory-direct in bulk cartons or private-label retail packaging.
- High-Density Micro-Porous Nano Structure: Formulated with premium 9.5-16 kg/m³ open-cell melamine foam that utilizes physical capillary action to erase tough scuffs and grime with just water
- Thermoformed Grid Texture for Extra Durability: Engineered with a hot-pressed surface pattern that increases physical friction, reduces crumbling, and drastically extends product lifespan during heavy scrubbing
- Super Absorbent & Water-Only Cleaning: Delivers an extraordinary 750%-2000% liquid absorption capacity, removing deep grease and stains without requiring chemical cleansers
- Surface-Safe, Quick-Drying Care: Gently lifts stubborn residue from delicate finishes without scratching, while the micro-porous cell structure lets the sponge dry quickly between uses
Open-Cell Melamine Foam vs Generic PU Cleaning Sponge
| Specification | This FoamTech Sponge | Generic Alternative |
|---|---|---|
| Material | Open-cell melamine resin foam | Polyurethane foam |
| Stain removal | Micro-abrasive pores lift marks with water alone | Relies on detergent and surfactants |
| Density range | 8-16 kg/m3, compressed grades available | Low density, usually under 30 kg/m3 |
| Wear pattern | Eraser-like wear; replace when block shrinks | Sogs and tears after repeated use |
| Best use | Walls, tile, cookware exteriors, hard stains | Light daily dishwashing |
Comparison provided for sourcing reference only. Magic eraser is a registered trademark of its respective owner. FoamTech is an independent OEM/ODM manufacturer and is not affiliated with, sponsored, or endorsed by any trademark holder.
Related Sourcing Guides
- Are Magic Erasers Just Melamine Foam? A Raw Material and Density Guide for Sourcing Agents – raw material and density basics that determine scrubbing power
- How to Test Melamine Foam Density (8 vs 16 kg/m3) Before Placing a Bulk Order – how to verify density before committing to a bulk order
Application Scenarios
1. High-Traffic Commercial Restrooms
Compressed density holds up where standard blocks dissolve fast: toilet-seat hinges, dispenser housings, tile skirting, and stall partitions in malls, offices, and stations.
2. Industrial & Workshop Surfaces
Tool handles, machine guards, and plastic control panels shed grease film and hand marks without solvents near sensitive equipment.
3. Elevators & Stainless Steel
Fingerprint haze on elevator panels and brushed-steel doors lifts cleanly — compressed edges keep a straight line along panel seams.
4. Wholesale & Private Label
Bulk supply for facility-service distributors, with private-label packaging and barcode labeling for recurring contract programs.
FAQ
Q1: How much longer does hot pressing make a sponge last?
A: Compression packs the cells tighter, so the block wears roughly two to three times slower than standard-density foam in the same job — the exact multiple depends on the surface and pressure. Commercial buyers pick hot-pressed grades when labor time, not sponge price, is the dominant cost.
Q2: Is the cleaning action different?
A: The mechanism is identical — open-cell melamine foam erases marks with water alone. Hot pressing only densifies the structure, so the block feels firmer in hand and keeps its edges longer on seams and grooves. Soak and squeeze before first use to restore flexibility.
Q3: Which certifications and compliance documents can you provide?
A: The plant runs under ISO 9001, ISO 14001, and ISO 45001 certified management systems. OEKO-TEX Standard 100 test reports, EU REACH compliance documentation, and an MSDS are available on request. BSCI audits social compliance, and FAMA (Disney Facilities and Merchandise Authorization) covers licensed production.
Q4: What customization do you support?
A: Custom compression ratios, dimensions, and colors, printed faces, multi-layer builds, steel-mold logo embossing, and private-label retail packaging.
Q5: What is the MOQ for bulk and custom orders?
A: Standard unbranded bulk orders start at 1,000-3,000 pieces depending on size. Custom compression specs and private-label packaging typically start at 10,000-20,000 pieces.
Q6: Do you support Amazon FBA sellers?
A: Yes. Multipack bundling, FNSKU/UPC labeling, suffocation-warning bags, and vacuum-compressed cartons — hot-pressed blocks compress especially well, cutting inbound volume further. Drop tests available before shipment.
Related Product
-
Tricolor Gift Box Set Melamine Sponge
-
Assorted 10-Piece Multipack Melamine Sponge
-
Korean Market Poly Bag Melamine Sponge Packaging
-
Japanese Hook Bag Melamine Sponge Retail Packaging
-
Japanese 21-Piece Melamine Sponge Poly Bag
-
8-Piece Scourer Sponge Retail Pack from the GRIT HERO Line
-
Multipack Sleeve Melamine Sponge Retail Packaging
-
Chinese Big Bag 30-Piece Melamine Sponge Bulk Pack
Contact FoamTech
Reply within 12 hours
Any requests or questions about products or anything else are welcome.
- +86 18530085611
- +86 18530085611
- [email protected]
- 500 meters east from the intersection of Shenzhou Road and Yanhe Road, Xinzheng, Zhengzhou, Henan Province, China.
- Fengte Industrial Park, Logistics Park Road, Yangguang Avenue, Yiwu City, Zhejiang Province, China.