Tri-Layer “Sandwich” Melamine Sponge
Tri-Layer “Sandwich” Melamine Sponge from FoamTech. Layer recipes, densities, and packaging are customizable, with bulk cartons or retail multipacks shipping factory-direct from our own production line.
Product Details
Engineered with layered construction, the Tri-Layer “Sandwich” Melamine Sponge keeps its shape through repeated squeezing in busy kitchens. Custom layer recipes and retail multipacks ship factory-direct.
- Advanced Tri-Layer “Sandwich” Structure: Combines dual outer layers of high-polymer melamine foam with a supportive PU sponge middle core to prevent tearing, cracking, and structural deformation during heavy scrubbing
- Dual-Sided Practical Design: Dual active surfaces allow versatile double-sided use, maximizing cleaning efficiency and extending product service life per sponge unit
- Eco-Friendly Water-Only Cleaning: Micro-porous 3D melamine structure physically lifts stubborn dirt, tea deposits, oil films, and shoe scuffs using only water, completely water-only
- Optimized Ergonomics & Water Retention: Standard 100 × 70 × 30 mm dimensions provide a comfortable hand grip, while the inner PU layer absorbs and retains moisture effectively for steady wiping action
- Full B2B OEM/ODM Customization: Direct factory supply supporting custom dimensions, density (8 kg/m³ ± 2 base density or higher), PU layer colors (black, blue, yellow, gray), and private-label packaging options
Multi-Layer Composite Sponge vs Single-Layer Sponge
| Specification | This FoamTech Sponge | Generic Alternative |
|---|---|---|
| Structure | Bonded layers: soft core, abrasive or mesh face | Single homogeneous layer |
| Scrubbing power | Dedicated scouring face for baked-on residue | One surface must clean and wipe |
| Service life | Layer separation tested; keeps shape after repeated squeeze | Tears along seams with heavy use |
| Water handling | Quick-rinse core, less detergent trapped | Retains residue and odor faster |
| Best use | Pots, pans, stovetops, daily kitchen duty | Light wiping only |
| Construction options | 3-layer hot-pressed build; layer count, firmness and face material tunable for OEM programs | Fixed single-layer construction |
Comparison provided for sourcing reference only. Magic eraser is a registered trademark of its respective owner. FoamTech is an independent OEM/ODM manufacturer and is not affiliated with, sponsored, or endorsed by any trademark holder.
Related Sourcing Guides
- Are Magic Erasers Just Melamine Foam? A Raw Material and Density Guide for Sourcing Agents – raw material and density basics that determine scrubbing power
- Shipping Melamine Sponges: CBM Math, Vacuum Compression and FBA Carton Planning – vacuum-compressed packing options that cut ocean freight
Application Scenarios
1. Busy Kitchen Dish Duty
The tri-layer sandwich build keeps its shape through hundreds of squeeze cycles — the soft melamine face wipes plates and glasses while the structured middle layer stops the block from folding mid-scrub.
2. Pot & Pan Rotation
Flip between the gentle face for non-stick cookware and the firmer composite face for baked-on rice and burnt residue — one sponge covers the whole dish rack.
3. Retail Multipacks
The sandwich cross-section is a visible quality story on the shelf: three distinct layers photograph clearly in blister packs and window boxes.
4. Wholesale & Private Label
Layer recipes (colors, thicknesses, materials) tuned per market; bulk cartons or retail blister packs ship factory-direct.
FAQ
Q1: Why three layers instead of a single-density block?
A: Each layer does a different job: the soft face protects delicate surfaces, the dense middle carries the structure, and the working face takes the abrasion. A single-density block wears as one mass; the sandwich build wears only where it should, so the sponge keeps its shape through far more squeeze cycles in busy kitchens.
Q2: Do the layers stay bonded when wet?
A: Layers are heat-laminated in-house, and bonding is checked on every production batch. Normal dishwashing use — soaking, squeezing, wringing — does not separate the layers; the failure mode seen in cheap glued composites is what the lamination step is designed to eliminate.
Q3: Which certifications and compliance documents can you provide?
A: FoamTech operates ISO 9001, ISO 14001, and ISO 45001 certified management systems. We supply OEKO-TEX Standard 100 test reports, EU REACH compliance documentation, and an MSDS on request for customs and retail onboarding. Social compliance is audited under BSCI, and we hold FAMA (Disney Facilities and Merchandise Authorization) for licensed production programs.
Q4: What customization do you support?
A: Layer recipes are fully tunable: material per layer, thickness, color (Pantone matched), embossing, and packaging — from bulk cartons to retail blister packs with UPC labeling.
Q5: What is the MOQ for bulk and custom orders?
A: Standard unbranded bulk orders start at 1,000-3,000 pieces. Custom layer recipes and private-label packaging typically start at 10,000-20,000 pieces.
Q6: Do you support Amazon FBA sellers?
A: Yes. Multipack bundling, FNSKU/UPC barcode labeling, suffocation-warning bags, and carton packing that reduces inbound storage fees. Drop tests can be arranged before shipment.
Related Product
-
Tricolor Gift Box Set Melamine Sponge
-
Assorted 10-Piece Multipack Melamine Sponge
-
Korean Market Poly Bag Melamine Sponge Packaging
-
Japanese Hook Bag Melamine Sponge Retail Packaging
-
Japanese 21-Piece Melamine Sponge Poly Bag
-
8-Piece Scourer Sponge Retail Pack from the GRIT HERO Line
-
Multipack Sleeve Melamine Sponge Retail Packaging
-
Chinese Big Bag 30-Piece Melamine Sponge Bulk Pack
Contact FoamTech
Reply within 12 hours
Any requests or questions about products or anything else are welcome.
- +86 18530085611
- +86 18530085611
- [email protected]
- 500 meters east from the intersection of Shenzhou Road and Yanhe Road, Xinzheng, Zhengzhou, Henan Province, China.
- Fengte Industrial Park, Logistics Park Road, Yangguang Avenue, Yiwu City, Zhejiang Province, China.